Accessories

Indoor
	Housings
	For LR6TM Family:
C6 6" Recessed Pan Conversion Kit for LR6 (120V, E26)	The C6 conversion kit provides a connector assembly and two-piece enclosure to convert “pan” type recessed downlight housings with 120V Edison base connectors to be converted for use with all Cree 120V six-inch downlights. It is rated for use with luminaires that consume low energy, such as the LR6 and CR6, optimizing energy density calculations for easier energy code compliance and LEED certification. Compatible Housings: Lightolier 1102P, Capri CM6, Cooper Halo H-600T, Lithonia LP6, Lithonia GRS 6 HSG, Juno TC906, Nora NHAV-6150, Nora NH-150	C6 Product Information (pdf) C6 Installation Instructions (pdf)
x
C6-LSA Conversion Kit for LR6 and CR6	The C6-LSA is a hard-wire conversion kit, designed to convert “pan” type recessed downlight housings, with 6”-8” apertures, for use with LR6 and CR6 downlights from Cree. Rated for use with low-wattage luminaires, the C6-LSA can help to optimize energy density calculations, making energy code compliance and LEED certification easier.	C6-LSA Product Information (pdf)
x
H6 6" Architectural Housing for LR6 (277V, GU24)	The H6 recessed architectural housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in new construction applications. It is rated for use with luminaires that consume low energy, such as the LR6 and CR6, optimizing energy density calculations for easier energy code compliance and LEED certification. The H6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.	H6 Product Information (pdf) H6 Installation Instructions (pdf)
x
RC6 6" Recessed Housing for LR6 (120V, GU24)	The RC6 recessed housing is designed to accommodate all Cree 120V six-inch downlights in new construction applications. It is rated for use with luminaires that consume a maximum of 12 watts, such as the LR6 and CR6, optimizing energy density calculations for easier energy code compliance and LEED certification. The RC6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.	RC6 Product Information (pdf) RC6 Installation Instructions (pdf)
x
RR6 6" Retrofit Housing for LR6 & CR6 (E26 or GU24)	The RR6 recessed housing is designed to accommodate all Cree 120V six-inch downlights in retrofit applications. It is rated for use with luminaires that consume low energy, such as the LR6 and CR6, optimizing energy density calculations for easier energy code compliance and LEED certification. The RR6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant. RR6 Product Compatibility: LR6, LE6, CR6 RR6-GU24 Product Compatibility: LR6-GU24, LE6-GU24, CR6-GU24, LR6-DR Series	RR6 Product Information (pdf) RR6 Installation Instructions (pdf)
x
SC6 6" Surface Mount Housing for LR6 (120V, GU24)	The SC6 cylindrical surface mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications. It is rated for use with luminaires that consume low energy, such as the LR6 and CR6, optimizing energy density calculations for easier energy code compliance and LEED certification. The SC6 housing also features a subtle, unobtrusive design that integrates cleanly into the interior space.	SC6 Product Information (pdf) SC6 Installation Instructions (pdf)
x
SC6-CM 6" Cord Mount Housing for LR6 (120V, GU24)	The SC6-CM cylindrical cord mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications. It supports a maximum suspension distance of 7 ft. to the top of the fixture and may be field modified for shorter distance.	SC6-CM Product Information (pdf) SC6-CM Installation Instructions (pdf)
x
SC6-WM 6" Wall Mount Housing for LR6 (120V, GU24)	The SC6-WM cylindrical wall mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications.	SC6-WM Product Information (pdf) SC6-WM Installation Instructions (pdf)
x
	For LR4 Family:
H4 4" Architectural Housing for LR4 (120V, GU24)	The H4 recessed architectural housing is designed to accommodate the Cree LR4 LED downlight in a variety of architectural applications. It is rated for use with luminaires that consume low energy, like the LR4, optimizing energy density calculations for easier energy code compliance and LEED certification. The H4 housing is IC rated, airtight, inherently protected, and California Title-24 compliant. Accomodates ceiling thickness from 1/4" to 1 1/4"	H4 Product Information (pdf) H4 Installation Instructions (pdf)
x
	Trackheads
TL Lampholder	For use with Lamps: LBR-30, LRP-38, LRP-38-GU24, LRP38-10L-25D, LRP38-10L-25D-GU24	Spec Sheet (pdf)
x
TG38 Gimbal Ring	For use with Lamps: LRP-38, LRP-38-GU24, LRP38-10L-25D, LRP38-10L-25D-GU24	Spec Sheet (pdf)
x
	Trims
LT6 LR6 Trim Accessory	LT6 trim accessories are designed for easy snap-in attachment to the LR6 family of downlights, providing a clean aperture appearance that decreases high angle brightness with minimal effect on lumen output. With a variety of colored finishes to choose from, the LT6 is a spec grade solution that compliments a variety of interior designs.	LT6 Product Information (pdf)
x
LT4 LR4 Trim Accessory	LT4 trim accessories are designed for easy snap-in attachment to LR4 light engines, providing a clean aperture appearance that decreases high angle brightness with minimal effect on lumen output. With a variety of colored finishes to choose from, the LT4 is a spec grade solution that compliments a variety of interior designs.	LT4 Product Information (pdf)
x
CT6 CR6 Trim Accessory	CT6 trim accessories are designed for easy snap-in attachment to CR6 downlights, providing a clean aperture appearance that decreases high angle brightness with minimal effect on lumen output. With a variety of colored finishes to choose from, the CT6 is a spec grade solution that compliments a variety of interior designs.	CT6 Product Information (pdf)
x
Essentia^® Flangeless Trim	An option to the Essentia recessed downlight family allows lighting designers to bypass trim rings in favor of a smooth, flush finish to the ceiling.
x
	CR Series Accessories:
DGA Drywall Grid Adapter CR Series Troffers	The DGA “lay-in” accessory enables Cree CR Series troffers to easily install into plaster and sheet rock ceilings. It may be installed into any hard ceiling to create a simple t-bar style opening. Target Availability Early 2012	DGA Product Information (pdf) DGA Installation Instructions (pdf)
x
EJBCR-5PK Expanded Junction Box CR Series Troffers	The CR Series Expanded Junction Box doubles the size of the standard J-Box and allows for easier wiring when doing through wire or using heavier gauges of wire.	EJBCR-5PK Product Information (pdf)
x
CR-347V 347V Conversion Kit CR Series Troffers and CR Series Light Engine	The 347V Conversion Kit allows a CR Series Troffer or CR Series Light Engine to be converted to work with 347V installations. The conversion kit can be easily installed in the field and works with step-dimming, 0-10V, and Lutron EcoSystem^®versions of the CR Series Troffer or CR Series Light Engine.	CR-347V Product Information (pdf) CR-347V Installation Instructions (pdf)
x
SMK-CR Surface Mount Kit CR Series Troffers	The SMK-CR surface mount kit is designed to convert Cree CR Series troffers into surface mount or suspended luminaires. It features a powder-coated white finish to compliment a variety of interior designs.	SMK-CR Product Information (pdf) SMK-CR Installation Instructions (pdf)
x
SMK-LE Surface Mount Kit CR Light Engines	The SMK-LE surface mount kit is designed to convert the Cree CR-LE light engine into a surface mount or suspended luminaire. It features a powder-coated white finish to compliment a variety of interior designs.	SMK-LE Product Information (pdf) SMK-LE Installation Instructions (pdf)
x
CR24 UPKIT 2'x4' Upgrade Kit CR Light Engines	The CR24 UPKIT is an accessory that converts any Cree CR-LE light engine (sold separately) to a complete upgrade kit for existing 2’x4’ fluorescent luminaires. It installs in most fluorescent troffers and parabolic troffers that have a minimum depth of 3 1/8”. Test install prior to ordering project quantities. Not compatible with air handling troffers. Target Availability Mid 2012	CR24 UPKIT Product Information (pdf) CR24 UPKIT Installation Instructions (pdf)
Outdoor
	Poles:
PS	Crown-Weld^® Square Straight Steel Poles For: BetaLED SLM™ IP66 Area, THE EDGE^®-LED Area, THE EDGE^® Round-LED Area, LEDway SLM IP66 Streetlight, LEDway SLM™ Series	PS Product Information (pdf)
x
PS5R	Round Steel Poles For: BetaLED SLM™ IP66 Area, THE EDGE^®-LED Area, THE EDGE^® Round-LED Area, LEDway SLM IP66 Streetlight, LEDway SLM™ Series	PS5R Product Information (pdf)
x
PSCV	Curved Round Tapered Steel Poles For: BetaLED SLM™ IP66 Area, THE EDGE^®-LED Area, THE EDGE^® Round-LED Area, LEDway SLM IP66 Streetlight, LEDway SLM™ Series	PSCV Product Information (pdf)
x
PSRV	Round Tapered Steel Poles For: BetaLED SLM™ IP66 Area, THE EDGE^®-LED Area, THE EDGE^® Round-LED Area, LEDway SLM IP66 Streetlight, LEDway SLM™ Series	PSRV Product Information (pdf)
x
	Tenons:
PD	Square Internal Mount Horizontal Tenons For: BetaLED SLM™ IP66 Area, THE EDGE^®-LED Area, LEDway SLM IP66 Streetlight, LEDway SLM™ Series	PD Product Information (pdf)
x
PT	Round External Mount Horizontal Tenons For: BetaLED SLM™ IP66 Area, THE EDGE^®-LED Area, LEDway® Streetlights, LEDway SLM IP66 Streetlight, LEDway SLM™ Series	PT Product Information (pdf)